Boxlight Careers

FAQS

Looking for answers? Try searching through our FAQ library or browsing the categories below.

What Can I Help You With?

MimioTeach

A flashing amber means the Mimio device is looking to connect to any USB hub—it recognizes that there is a hub available to communicate to. If using Windows, open MimioStudio and go to Tools > Settings > Classroom Devices. If using Mac, go to the Apple header and select Notebook > Preferences > Classroom Devices to make sure that MimioTeach or Vote is connected. If it is not connected (might show available), then highlight the MimioTeach and click Connect. If you are successful re-pairing the Mimio wireless components, the power/status LED on the Mimio devices should turn to solid green. This initiates the pairing process. A flashing green means that the USB hub is plugged in and recognizes the MimioTeach or Vote because it was connected to it before but mimiosys.exe has been terminated, and once MimioStudio is open you will get a solid green. If you continue to have issues, please reach out to Technical Support for additional troubleshooting.

Categories: MimioTeach, MimioVote
  1. Verify MimioStudio 11 or above is installed.
  2. Verify the wireless USB receiver is connected to your PC’s USB port.
  3. Press and hold the power LED button on the MimioTeach bar until it begins to blink (approximately 20 seconds).
  4. Open Mimio Notebook.
  5. Select the Tools menu, then select Settings.
  6. Select Classroom Devices. The MimioTeach should show as available under the Status column.
  7. Select MimioTeach from the list and then select the Connect button. The MimioTeach status should change to connected.
Category: MimioTeach

MimioVote

A flashing amber means the Mimio device is looking to connect to any USB hub—it recognizes that there is a hub available to communicate to. If using Windows, open MimioStudio and go to Tools > Settings > Classroom Devices. If using Mac, go to the Apple header and select Notebook > Preferences > Classroom Devices to make sure that MimioTeach or Vote is connected. If it is not connected (might show available), then highlight the MimioTeach and click Connect. If you are successful re-pairing the Mimio wireless components, the power/status LED on the Mimio devices should turn to solid green. This initiates the pairing process. A flashing green means that the USB hub is plugged in and recognizes the MimioTeach or Vote because it was connected to it before but mimiosys.exe has been terminated, and once MimioStudio is open you will get a solid green. If you continue to have issues, please reach out to Technical Support for additional troubleshooting.

Categories: MimioTeach, MimioVote
  1. Verify Mimio Studio 11 or above is installed.
  2. Verify the wireless USB receiver is connected to your PC’s USB port.
  3. Press and hold the power LED button on the MimioVote charging station until it begins to blink (approximately 20 seconds).
    Image
  4. Open Mimio Notebook.
  5. Select the Tools menu, then select Settings.
  6. Select Classroom Devices. The MimioVote should show as Available under the Status column.
    Image
  7. Select MimioVote from the list and then select the Connect button. The MimioVote status should change to Connected.
Category: MimioVote

MimioPad

Please click here to open a PDF with the pairing instructions.

Category: MimioPad
  1. Verify Mimio Studio 11 or above is installed.
  2. Verify the wireless USB receiver is connected to your PC’s USB port.
  3. Press and hold the power LED button on the MimioPad until it begins to blink (approximately 10 seconds).
    Image
  4. Open Mimio Notebook.
  5. Select the Tools menu, then select Settings.
  6. Select Classroom Devices (the MimioPad should show as Available under the Status column).
    Image
  7. Select MimioPad from the list and then select the Connect button. The MimioPad status should change to Connected.
Category: MimioPad