Looking for answers? Try searching through our FAQ library or browsing the categories below.
MimioStudio Software | MimioTeach | Mimio Xi / Interactive | MimioVote | MimioCapture | MimioProjector | MimioView | MimioMobile | MimioPad | Mimio Ink Capture kit | MimioBoard | MimioBoard Touch | MimioClassroom System | MimioDisplay | MimioHub | Gallery | MimioConnect | ProColor Display | Cables
What Can I Help You With?
- Verify Mimio Studio 11 or above is installed.
- Verify the wireless USB receiver is connected to your PC’s USB port.
- Press and hold the power LED button on the MimioPad until it begins to blink (approximately 10 seconds).
- Open Mimio Notebook.
- Select the Tools menu, then select Settings.
- Select Classroom Devices (the MimioPad should show as Available under the Status column).
- Select MimioPad from the list and then select the Connect button. The MimioPad status should change to Connected.
When you add the MimioPad wireless tablet to your MimioTeach system, you and your students can collaborate on whiteboard lessons from up to 30 meters (100 feet) from the classroom computer. The MimioPad tablet works with a rechargeable pen stylus and MimioStudio software. You can access the most common operations of MimioStudio software from custom-tailored shortcut keys on the tablet. Up to 50 MimioPad tablets can connect to one computer, so students can participate without leaving their seats. The MimioPad tablet allows for effective student engagement during a lesson and is especially useful with kinesthetic learners (students who learn by touch). With the MimioPad tablet, teachers have built-in classroom management and can freely move around the classroom.
There is a red LED on the stylus of the MimioPad (1st Generation) under the buttons. What does this mean?
This is a low battery indicator. Replacing the stylus battery should fix this issue. The stylus uses one AAA battery.
How long does the battery last on the MimioPad (1st Generation)? How long does it take to recharge the MimioPad?
The battery lasts for up to 16 hours of continuous use. It takes up to 2 hours to recharge the MimioPad.
The MimioPad only works on the primary monitor. You can change your second monitor to be the primary monitor if you want to use the MimioPad on the projected screen.
Please see the link below if you run into problems changing the primary monitor.
As of right now, only the new MimioPad will work fully with Windows 8 and above. The older MimioPad (1st Generation) is not completely compatible with Windows 8. The shortcut buttons will not work, the device will not activate MimioStudio, and it won’t show up under Classroom Devices. The user will only have mouse functionality.
The MimioPad (1st Generation) is used as a Teacher Pad. The MimioPad (1st Generation) can be used by a student, but they will have full control as a teacher.
It will work up to 30 feet (9 meters) from the computer.