Boxlight Careers

FAQS

Looking for answers? Try searching through our FAQ library or browsing the categories below.

What Can I Help You With?

Mimio Ink Capture kit

  • When using Mimio interactively with a projector, select the pen tool and appropriate color from the Mimio Tools to record handwritten notes.
  • You should not be using the Capture Kit pens with dry-erase markers when using Mimio interactively. Set the ink stylus pens aside and only use the Mimio Mouse interactive pen when using Mimio interactively with a projector. It is an incorrect setup to use ink pens with a projected image.
  • Verify you are correctly in Capture Mode. If all stylus pens show up black, MimioStudio is most likely configured in Interactive Mode and needs to be reconfigured into Capture Mode.
  • Check the stylus color settings in MimioStudio. Select Tools > Settings from the Notebook pull down menu, then select Ink Capture on the left to confirm the color settings for the individual pens. NOTE: You must have a Mimio device connected to your computer to view and modify the pen settings.
  • Verify Mimio Notebook is in Capture Mode. When in Capture Mode, there will be a status message in the lower left corner of Mimio Notebook identifying that you are connected to a Mimio device. Additionally, when in Capture Mode, you will see an image of the Mimio device on the Notebook page as well.
  • Verify the Mimio system works with your stylus pens. If the Mimio works with the pens, but the eraser does not work, try replacing the battery (if using Xi). If a new AAA battery is installed and the eraser still does not work, contact Technical Support for a warranty service RMA.
  1. In Windows, open Mimio Notebook > Tools > Settings.
  2. In Mac, open Notebook from the Apple header > Preferences > Settings.
  3. Select Ink Capture on the left side of the MimioStudio Settings dialog.
  4. Select the Pens of your choice and adjust how it will appear on the Mimio Notebook page, according to color and thickness.
  5. Select OK.
  • The eraser will not work if using Mimio with a projector in Interactive mode.
  • Try replacing the AAA battery in the eraser (if using with Xi).
  • Verify that the eraser buzzes when the felt pad is depressed in the center. If there is no buzzing, contact Technical Support for a warranty replacement RMA.

Changing pen color and thickness:

  1. In Windows, open Mimio Notebook > Tools > Settings.
  2. In Mac, open Notebook from the Apple header > Preferences > Settings.
  3. Select Ink Capture on the left side of the MimioStudio Settings dialog.
  4. Select the Pen of your choice and adjust how it will appear on the Mimio Notebook page, according to color and thickness.
  5. Press the Ok button.

NOTE: Changing the pen thickness will make the virtual ink thicker or thinner within Mimio Notebook.

Load More